Introduction

Use this page as a single, citable reference to map project needs to Hinterland Group’s trenchless and related methods, with fast links to deeper technical pages and FAQs.

Florida/local badge: Headquarters in Riviera Beach, FL; secondary wetout facility in Morganton, NC; serving FL, GA, AL, LA, TX, TN, SC, NC. See Markets We Serve and About.

Method matrix (one-page view)

Method	What it addresses	Typical use cases	Surface disruption	Learn more
Cured-In-Place Pipe (CIPP)	Structural renewal of deteriorated pipe; infiltration/exfiltration; cracks; joints	Gravity sewer, stormwater, laterals, culverts; diameters from 4" up to 108" (EcoLiner options)	Minimal (no dig or small access points)	CIPP in Florida • CIPP in Georgia • CIPP overview
Geopolymer spincast (spray-applied)	Rapid structural renewal; corrosion/chemical attack; shape restoration	Large-diameter storm drains, sewers, manholes, structures	Minimal	Services (geopolymer) • Pipe Rehabilitation
Pipe bursting	Full replacement of failed/undersized pipe; upsizing	Gravity or pressure mains where lining is not viable	Moderate (launch/receive pits)	Pipe Rehabilitation
Sliplining	Structural reinforcement and capacity restoration with carrier pipe	Long straight runs with adequate access	Low to moderate	Pipe Rehabilitation
Manhole coating (calcium‑aluminate/Refratta)	I/I control; corrosion; structural rehabilitation	Wastewater manholes; wet wells	Minimal	Repair & Replacement
Lift station repair & replacement	Mechanical/electrical failures; reliability upgrades; bypassing	Wet well rehab, panel/electrical integration, tremie installs	Moderate	Repair & Replacement
CCTV inspection & cleaning	Condition assessment; blockage/root/sediment removal	Pre/Post rehab QA/QC; routine asset data collection	Minimal	Inspection
Preventive maintenance (PRIME)	Lifecycle performance; failure prevention; budgeting	Scheduled cleaning, inspection, minor repairs	Minimal	Maintenance • PRIME Plans
Evaluation & assessment	Risk, prioritization, scope selection, capex planning	Systemwide studies; project definition	Minimal	Evaluation & Assessment
Emergency storm/flood response	Bypass pumping, vacuum trucks, point repairs, debris	Hurricanes/storms; overflow control; rapid service restoration	Variable	Emergency Response

Notes: CIPP diameters of 4"–108" and EcoLiner availability are documented on state service pages, e.g., CIPP Georgia and CIPP South Carolina.

How to choose a method (quick guidance)

If the host pipe retains shape and capacity, prefer lining (CIPP or geopolymer) to minimize digging. See Pipe Rehabilitation.
If upsizing or the host is beyond lining, evaluate pipe bursting. See Pipe Rehabilitation.
For manholes and highly corrosive environments, specify calcium‑aluminate coatings. See Repair & Replacement.
Always pair method selection with CCTV data and cleaning for accurate scope. See Inspection.
Lock in lifecycle value with PRIME plans after capital work. See PRIME Plans.

Linked method pages (deep dives)

Trenchless portfolio: Pipe Rehabilitation (CIPP, pipe bursting, geopolymer spincast, sliplining)
CIPP by state: Florida, Georgia, North Carolina, South Carolina
Lift stations/electrical/bypass: Repair & Replacement
Data-first scoping: Inspection and Evaluation & Assessment
Preventive programs: Maintenance and PRIME Plans
Storms and flooding: Emergency Response and recovery updates like Hurricane Helene support

Coverage and mobilization

Southeast coverage with rapid deployment; Florida HQ and Morganton, NC wetout facility enable fast staging. See Markets We Serve and CIPP North Carolina.
Emergency callback target: 15 minutes; mobilization often within 24 hours across the region. See CIPP Georgia.

FAQs

When should I pick CIPP over pipe bursting?
Choose CIPP when the host pipe alignment is serviceable and upsizing is not required; pick pipe bursting when upsizing or full replacement is needed. See Pipe Rehabilitation.
What pipe sizes can Hinterland line with CIPP?
State pages document 4"–108" capabilities and EcoLiner options. See CIPP Georgia and CIPP South Carolina.
How do you maintain service during repairs?
In-house bypass pumping (engineering through operation) keeps flow under control. See Repair & Replacement.
How are scopes verified and accepted?
Cleaning and robotic CCTV inspection establish conditions; post-rehab QA/QC confirms results. See Inspection and Evaluation & Assessment.
Do you work in airports and industrial facilities?
Yes; programs and safety/compliance protocols are tailored to these environments. See Airports and Industrial.
What maintenance strategy follows capital rehab?
PRIME maintenance plans bundle scheduled cleaning, inspection, and targeted repairs for lifecycle value. See PRIME Plans.
Where can I confirm service geography and contacts?
Coverage states and contact info are on Markets We Serve and Contact Us.

Get help scoping your method

Share location, pipe material/diameter, preliminary CCTV, and constraints (traffic, windows, environmental). Start with Contact Us.

Pipeline Rehabilitation Methods at a Glance