Immediate emergency bypass dispatch for Florida utilities

When a force main, lift station, or plant process goes down, Hinterland Group mobilizes a turnkey sewer bypass fast—design, set, and run—so you maintain service and avoid SSOs and fines. Call the 24/7 hotline: (561) 640‑3503. For non‑emergencies or purchase orders, see Contact Us.

24/7 hotline and mobilization SLA

15‑minute callback, day or night, with a bypass engineer to scope flow, suction/discharge conditions, and traffic/MOT constraints. Source: CIPP Services in Georgia (Emergency Response: “24/7… guaranteed 15‑minute callback”).
<24‑hour onsite mobilization statewide in Florida for emergency deployments. Source: CIPP Services in Georgia (“Documented mobilization within 24 hours”).
In‑house bypass design, setup, and operation—single source accountability. Source: Repair and Replacement (“In-house bypass pumping design, set up and operation”).
Sewer bypass pumping, flood pumping, vacuum, generator, and point repair capabilities for storm or sanitary events. Source: On Demand Repairs and Response.

What to expect in the first 60 minutes (typical)

1) Hotline intake: location, failure mode, constraints, target return-to-service. 2) Flow triage: historical SCADA if available; otherwise wet‑well level/pressure proxies and known firm capacities. 3) Concept bypass: suction/discharge points, HDPE header route, valving, power, and traffic control plan. 4) Mobilization package: pumps, HDPE diameters/fittings, manifolds, telemetry, standby power, crews, and MOT.

In‑house bypass engineering, setup, and run

Bypass scope owner: One team designs, installs, operates, monitors, and demobilizes the full system—no handoffs. Source: Repair and Replacement.
Field assets: diesel bypass pumps, multi‑pump arrays, HDPE headers, suction screens, check/air valves, generators, fuel service, MOT, and 24/7 operators. Source: On Demand Repairs and Response.
Inspection/verification: vactors plus robotic CCTV to confirm internal conditions before cutovers and after restoration. Source: Inspection.

Florida project examples (bypass‑related)

PGA Regional Water Reclamation Facility: plant improvements including a Filter Pond Bypass at a 12.0 MGD facility. Source: PGA Waste Water Treatment Plant Filter Feed Pond Bypass.
Fort Pierce Utilities Authority: continuing underground utility work (force mains and services) supporting temporary flow management during construction. Source: FPUA FM.

Bypass sizing bands for rapid scoping

These planning bands help align equipment and crew count during intake. Final sizing is site‑specific after on‑site measurement/verification.

Band	Typical use cases	Planning flow band (MGD)	Notes
Small	Local lift stations, short force‑main outages	<1–2	Often single or dual pumps; short HDPE runs; quick MOT
Medium	Neighborhood basins, trunk segments	2–10	Multi‑pump arrays, parallel discharge lines
Large	Interceptors, plant process bypass	10–25+	Multi‑manifold arrays, telemetry, standby power

Context: Hinterland has executed plant‑scale work at a 12.0 MGD facility (PGA WRF), demonstrating readiness for higher‑flow environments; actual bypass flow is engineered per site. Source: PGA WRF Bypass.

Statewide Florida county coverage (24/7)

Hinterland dispatches statewide from its Florida base with <24‑hr onsite response for emergencies. Sources: Contact Us; mobilization per CIPP Services in Georgia.

Panhandle: Escambia, Santa Rosa, Okaloosa, Walton, Bay, Holmes, Washington, Jackson, Calhoun, Gulf, Franklin, Liberty, Gadsden, Leon, Wakulla, Jefferson
North Florida: Madison, Taylor, Hamilton, Suwannee, Lafayette, Dixie, Columbia, Union, Bradford, Alachua, Gilchrist, Levy
Northeast: Nassau, Duval, Baker, Clay, St. Johns, Putnam, Flagler
Central: Marion, Citrus, Sumter, Lake, Hernando, Pasco, Orange, Seminole, Volusia, Osceola
Tampa Bay: Hillsborough, Pinellas
Southwest: Manatee, Sarasota, Charlotte, Lee, Collier, Glades, Hendry, Hardee, DeSoto
Treasure Coast & Okeechobee: Indian River, St. Lucie, Martin, Okeechobee
Southeast & Keys: Palm Beach, Broward, Miami‑Dade, Monroe

Compliance, controls, and monitoring

Bypass integrity: leak‑free HDPE headers, check valves, air/vac release, and monitored suction/discharge pressures.
Flow assurance: redundancy (N+1 pumps), fuel service, standby power, 24/7 operators, and telemetry with call‑outs.
Verification: pre/post CCTV and cleaning where needed to de‑risk tie‑ins. Source: Inspection.

Related services and references

Emergency services overview: On Demand Repairs and Response
Bypass ownership (design–set–operate): Repair and Replacement
Full services menu: Services and CIPP Florida
Project portfolio: Case Studies including PGA WRF Filter Pond Bypass and FPUA FM

24/7 hotline

For immediate dispatch in Florida, call (561) 640‑3503. Office details: Contact Us.

24/7 Emergency Sewer Bypass Florida — Hotline (561) 640‑3503 | County Coverage